Matabi Berry 7 Fertiliser Sprayer

How to use your sprayer safely and effectively

Step 1: Assemble the sprayer

• Connect the hose to both the lance and the lower part of the tank
• Attach the straps securely
• Double-check all connections to ensure everything is tightly screwed to prevent chemical leaks.

Step 2: Fill the tank

Pour the desired amount of liquid into the tank, ensuring it doesn't exceed the maximum fill line.

Step 3: Pressurize the sprayer

• Screw the chamber onto the tank tightly
• Pump the chamber handle approximately 24 times to build pressure.

If the pressure becomes too high, the built-in safety valve will automatically release the excess. Verify that it's functioning correctly before proceeding.

Step 4: Start spraying

• Press the handle on the lance to release the spray
• Adjust the nozzle to achieve the desired spray pattern
• Keep an eye on the pressure. If it drops, pump the chamber again to maintain optimal spraying performance

Tips for best results

• Always check for leaks before spraying
• Maintain steady pressure for an even application
• Clean the sprayer thoroughly after use

Care and maintenance for your sprayer

Step 1: Depressurize after use

Release any remaining pressure from the sprayer to ensure safe handling and storage

Step 2: Clean thoroughly

• Rinse the tank and all components, including the nozzles and filter, using clean water
• If the nozzle or filter becomes clogged, flush them with water - avoid using metal tools to prevent damage

Step 3: Maintain moving parts

Apply a few drops of oil or grease to moving parts regularly to keep the joints in top condition and extend your sprayer's lifespan.

• Remove the clip on the upper part of the chamber
• Pull the handle to access the retainer and replace it as needed.

Step 5: Store Properly

Always store the sprayer indoors, away from extreme temperatures to protect from frost and heat damage.